Showing posts with label NC DOT. Show all posts
Showing posts with label NC DOT. Show all posts

June 7, 2013

NCDOT Removes EV Charging Stations From Rest Stops | WUNC



NC fails to support public interest in rechargeable cars and stops effort to use renewable energy on NC roads.

Poor planning and lack of foresight causes NC DOT and lawmakers to fail in an effort to support use of rechargeable cars on NC highways. According to DOT spokeswoman Julia Casadonte "the stations were meant to be a temporary pilot project" and that the department removed the charging stations to resolve a conflict in laws. Rather than solve a problem of how to accommodate payment for recharging, the DOT removed the stations because a poorly planned directive required the DOT to find a way to charge drivers for using the stations. This conflicted with a Federal law saying charges may be only made for vending machine services along highways. 

The charging stations were in fact being used by the public. Over 14 months 146 vehicles were recharged at a total cost of $44.00 for the energy consumed. Since the state did not find a way to allow customers to pay for the service they decided to just "pull the plug" and remove the chargers. 

Read the article... NCDOT Removes EV Charging Stations From Rest Stops | WUNC

April 2, 2008

Bumpy rides in Apex NC


When driving or biking in Apex be prepared for a bumpy ride and be aware some of the main roads are always spotted with major heat cracks and pot holes. This is not a new issue with the Town of Apex but continues despite efforts of citizens to get the town to keep roads in town in good shape. The town staff routinely answers complaints about many local road conditions with the response that "Apex is not responsible for road problems along state maintained roads even if they are inside the town limits". When road problems are referred to the town manager, Bruce Radford, the immediate response is that "roads maintained by the state and are not our responsibility and we have not been able to get anyone in NC DOT to address the problems". Town officials insist that the town is not responsible for problems with roads the state oversees even if they are inside Apex. This response was included in a recent news article pointing out problems bikers have riding on Salem Street, the road through the center of downtown.

Bruce Radford, Apex's town manager, states in the article that he is well aware of the problem. "Of all the roads I receive complaints about in the town of Apex, this one is much worse than any other," Radford said. "It will jar your teeth and your car as well."

An article published March 22nd, 2008, in the News and Observer (also discussed in the Triangle Troubleshooter) touches on a problem along a portion of south Salem Street that presents riders, especially bikers, with a constant series of jolts when traveling the road. Although the north section of Salem was not mentioned, the area from Hunter Street all the way to US 64 is much worse and is riddled with major cracks across the whole road that deliver a jolt to drivers and bikers alike. No doubt these are the result of high temperatures from years of summer heat but the problem persists and neither the state or town will make an effort to repair or resurface the road.

Other roads in and around town (NC 1010, Davis Drive, NC 55 and parts of US 64) are in similar poor and unsafe condition. On US 64 between Laura Duncan Road and US 1 there are no less than eight significant dips in the road heading toward US 1 that cause vehicles to drop several inches when driving in the left lane at normal speeds. The left lane of US 64 onto US 1 northbound at the US 1 underpass also has had a sunken area across the lane for several years and the state does not see fit to repair it. It would seem the likely cause of these dips is a collapse or compression of the road support beneath these areas from storm runoff routed from drains in the center of the road to the shoulders. This same problem is evident in numerous places along NC 55 between Apex and Holly Springs and suggests poor construction during recent road improvements that seems to pop up in many places around the state in news reports about NC road construction projects.

Since neither the state or the Town of Apex seems to take responsibility for keeping roads in good shape it would seem prudent for drivers and bikers to stay alert for poor road conditions and be prepared to be jolted while traveling local roads...
News and Observer
March 22, 2008
David Bracken, Staff Writer

No smoothing out in sight for a bumpy ride in Apex

APEX - If you're one of the many cyclists who regularly ride down South Salem Street in Apex, you know the particular stretch we're talking about.

Situated between Apex Barbecue and Tingen roads, this half-mile section is lined with cracks, unexpected bumps and the occasional pothole.

"I'm just not sure what they think cyclists are supposed to do there," cyclist Janyne Kizer said. "They're telling us to go there."

This section of South Salem, also known as old U.S. 1, is part of the U.S. Bicycle Route 1, which runs along the eastern seaboard from Florida to Maine. Kizer is one of dozens of cyclists who ride the route each Saturday.

Kizer has complained to the town of Apex but was told the road's condition is the responsibility of the state Department of Transportation.

Bruce Radford, Apex's town manager, is well aware of the problem. "Of all the roads I receive complaints about in the town of Apex, this one is much worse than any other," Radford said. "It will jar your teeth and your car as well."

In addition to being a popular cycling route, the section of road is an entry point into four subdivisions, Radford said. He has no idea when it was last resurfaced, and he says DOT officials have not been able to tell him when it will be repaired.

"We've not really received much hope that it's going to be repaired," Radford said.

Messages left with engineers in charge of road maintenance for N.C. DOT District 5, which covers Wake County, were not returned this week. Original article...

February 7, 2008

Fire LyndoTippett - It's time for him to go

North Carolina's DOT has found itself behind the bulls eye once again after a new state auditor's report reveals that the department has incurred additional costs on behalf of NC taxpayers to the tune of an extra $152 million over the last three years on 390 completed projects. The extra costs are related to mismanagement, poor planning and because of schedule changes, environmental reviews and design changes. The report states that 73 percent of those projects missed their projected construction starts. Forty percent of the projects missed that mark by more than a full year.

According to Les Merritt, NC's State Auditor, "DOT is a multi-billion dollar state agency that appears to operate on hunches and intuition rather than hard data analysis. As a result, taxpayers paid $152.4 million in unnecessary construction costs."

Merritt's report indicated that the auditors found that DOT does not track or analyze delays or successes in its road-building projects, despite repeated warnings and recommendations during the past 10 years from auditors and consultants. The auditors also said that if the department had an effective system for tracking performance, officials might have seen that delays cost taxpayers over $150 million.

"The lack of performance management practices has been pointed out to DOT before," the auditors wrote.

As expected, DOT officials are disputing the findings rather than admitting they happened and are not focusing on working toward solutions. Debbie Barbour, director of preconstruction for the department, claims engineers have only a rough guess of how long a project will take when funding is approved and says the detailed engineering has not been done up front (as it should be). She states that since the engineering work has been done at approval time, the estimated completion date can't take into account problems along the way. She also argues that environmental problems, obtaining permits and other issues are out of control of the department and says it is unfair to say projects are late because of those and other issues.

Signs continue to surface that the DOT is a poorly managed organization and unacceptable practices from the top down cause virtually everything DOT touches to be poorly done, to introduce avoidable significant problems and delays into projects and to cause taxpayers to pay more for substandard work that does not meet growing needs of the state.

It's time for Governor Easley, who takes much of his direction from his staff of buddies that help him make unwise choices and appointments of "good old boys" to state leadership positions, to realize the severity of problems in DOT and other state organizations and fire top leaders like Lyndo Tippett and mid-level management people like Debbie Barbour and at least make a feeble effort to re-establish a little control and get something for the billions of dollars spent on roads and projects while he is still in office.

Read the full article about findings in the study...

News and Observer
February 7, 2008
Dan Kane and Benjamine Niolet, Staff Writers
Delayed road projects cost millions

An audit of three years of completed state Transportation Department projects found many of them finished behind schedule, leading to what auditors say is an additional $150 million in inflation-related construction costs.

"DOT is a multi-billion dollar state agency that appears to operate on hunches and intuition rather than hard data analysis," State Auditor Les Merritt said. "As a result, taxpayers paid $152.4 million in unnecessary construction costs."

The 43-page audit released today looked at 390 highway projects completed between April 2004 and March 2007. Auditors said that 73 percent of those projects missed their projected construction starts. Forty percent of the projects missed that mark by more than a full year, Merritt said.

The audit said that the permitting process, environmental reviews and design changes caused many of the delays.

Department officials say the auditors held the department to an unfair standard. The $150 million figure is oversimplified and doesn't account for some $80 million the department saved by expediting projects within the same time frame.

The auditors based a project's start date and projected completion date on when the transportation board approved money for preliminary engineering. The problem with that method, said Debbie Barbour, director of preconstruction for the department, is that engineers have at that time only a rough guess over how long a project will take. Since no engineering work has been done, the estimated completion date can't take into account problems along the way.

"In developing a project, there are certain things that are outside the department's control, such as obtaining an environmental permit," Barbour said. "We don't really have control of the time frame on every activity in the approval process."

The auditors found that the department does not track or analyze delays or successes in its road-building projects, despite repeated warnings and recommendations during the past 10 years from auditors and consultants. The auditors said that if the department had an effective system for tracking performance, officials might have seen that delays cost taxpayers $150 million.

"The lack of performance management practices has been pointed out to DOT before," the auditors wrote.

But department officials say the department has implemented several new programs and processes since 2001 that wouldn't have been evident in the time period the auditors examined. The department has worked with the state Department of Environment and Natural Resources to streamline environmental permitting. The department measures whether it met target dates for acquiring property for a project or opening bids.

And the department has spent $3.6 million to hire a consultant to help officials change the way the department does business.

Bill Rosser, the state highway administrator said that the department works hard to finish projects on time, but road building is a complex and expensive business. Rosser said if the auditors looked at a newer set of projects, the findings would be much different.

"We would like to be responsive and deliver our projects," Rosser said. "We're always looking at the way the process works." Original source ...

February 3, 2008

NC's poor roads tied to bad politics, poor management and Governor Easley's bad choices

News continues to flow regarding North Carolina DOT's inability to solve major funding issues and failure to avoid major problems providing safe and adequate roads for the state. Under the leadership of Governor Easley's appointee, Lyndo Tippett, the organization continues business as usual with more of the same after promising to get advice from a consulting firm to help solve internal problems.

News broke in late January about another costly failure on the new I-795 between Wilson and Goldsboro rivaling the botched I-40 scandal that cost taxpayers some $22 million to repair in 2007. The new I-795 road is crumbling under weight of traffic after only two years of service and will likely cost some $7 million more to the state's taxpayers.

The latest report indicates the department's problems are still strongly tied to politics and fund raising issues that continue even after attempts by the state to separate politics and fund raising from the DOT organization 10 years ago, force disclosure of members fund raising records and require the board have members
with special skills in such fields as the environment and mass transit. Even that effort has failed and board membership "remains a plum spot for big political fundraisers who continue to ignore conflicts of interest and the wider needs of the state beyond their own districts"...
News & Observer
Dan Kane and Benjamin Niolet, Staff Writers
February 03, 2008

N.C. road building still mired in politics

Reforms in a 1998 law have failed to separate the state Board of Transportation from political fundraising

Nearly 10 years ago, state legislators championed a series of reforms for the scandal-plagued N.C. Board of Transportation that were intended to take the politics out of building roads.

Future appointees would have to disclose their political fundraising. Five of the 19 seats would be reserved for people with special skills in such fields as the environment and mass transit. Members would have to avoid even the appearance of a conflict of interest.

"The board's policies, effectiveness and integrity are important to almost every citizen," Beverly Perdue, then a state senator, said on Sept. 23, 1998, the day the bill cleared the legislature. "The public has demanded reform, and this bill lays the groundwork."

That groundwork has proven a weak foundation. A decade after Perdue hailed the reform law, the 19-member DOT board remains a plum spot for big political fundraisers who continue to ignore conflicts of interest and the wider needs of the state beyond their own districts.

For example:

* The fundraising disclosure rule is toothless. The only fundraising that board members must disclose is contributions directly handed to them. Asking people to give to a campaign or holding fundraisers -- two common ways to raise campaign money -- aren't considered fundraising on disclosure forms.

* Two of the five seats intended to bring more professionalism to the board have been given to fundraisers best known for running restaurant chains.

* Conflicts of interest continue to surface. Last month, board member Thomas Betts Jr. of Rocky Mount resigned after he sought to raise $20,000 in campaign money from country singer Randy Parton and the others behind the struggling performing arts theater in Roanoke Rapids. Betts had directed $2.5 million in road work to the theater over the previous year. He sought campaign money for Perdue, now lieutenant governor, who is seeking to be the next governor.

* Some at-large members, who are supposed to look out for the entire state, are steering their discretionary money to their home districts.

The board oversees a department with a $3.8 billion budget and a serious public image problem. A chorus of lawmakers, public policy advocates and even transportation department employees say that the department is dysfunctional -- at a time when the state's transportation needs are growing dramatically. A special "blue ribbon" legislative panel is meeting to figure out how to get the department back on track.

The department even bungled trying to fix itself. It hired a consultant at a cost of $3.6 million to help assess its strengths and weaknesses and foster change. But the department refused to disclose the terms of the contract and any findings until Gov. Mike Easley ordered them made public.

The board's makeup and activities have emerged as a campaign issue in the gubernatorial election. Perdue's rival for the Democratic nomination, State Treasurer Richard Moore, has made it a key part of his campaign. Last month, among other proposals, he announced that he would not appoint fundraisers to the board. Perdue has not called for banning fundraisers from the board.

Ten years ago, Perdue's DOT reform bill won favor over a stricter bill initially filed in the House that would have banned fundraisers from the board, required five experts in various areas, and taken away the governor's power to appoint the transportation secretary.

Last month, Easley said trying to ban fundraisers from the process would just push the money underground.

"When you get into the fundraising business, if people want to participate, they'll find a way, just like the squirrel into the bird feeder," Easley said. "I want to know how much somebody's given who's been appointed and I think people want to know as well."

Finding wiggle room

But when Easley was elected governor in 2000, two years after the reform bill passed, he quickly found wiggle room in the transportation reform law. Easley's counsel, Hampton Dellinger, asked Grayson G. Kelley, a senior deputy attorney general, for an interpretation of what made someone a fundraiser under the new law. (Dellinger is now a Democratic candidate for lieutenant governor.)

Kelley focused on the phrase "personally acquired" in the law. He said that meant the only disclosure required was of "funds the appointee personally accepted from a donor and physically transferred to the campaign, executive committee or political committee."

To make sure he had understood the intent of Perdue and other sponsors, Kelley said, he talked to the legislative staff who drafted the law. He said they support his view "that a narrow construction of the disclosure provision was intended."

Perdue declined to be interviewed for this report. Her spokesman, David Kochman, released a statement saying the legislation was a "starting point" for reform and stronger than the version passed by the House. Easley also declined to be interviewed.

With the opinion in hand, Easley's staff advised his appointees to the board in a memo that they did not have to disclose fundraising if it did not involve collecting the checks.

Shortly afterward, appointees Louis W. Sewell Jr. of Jacksonville and D.M. "Mac" Campbell of Elizabethtown wrote "none" on their fundraising disclosure forms. Interviews with other Easley fundraisers, and an internal Easley campaign document obtained by The News & Observer, show that Sewell helped meet a $125,000 fundraising goal in Onslow County, while the campaign counted on Campbell to help raise $50,000 in Bladen County. (An Easley spokesman, Seth Effron, said neither Easley nor Dave Horne, the campaign treasurer in 2000, could confirm the document's authenticity. Effron said Easley declined to comment on the information within it.)

Another Onslow County fundraiser for Easley, Joe Henderson, said that he, Sewell and another man solicited contributors by phone and held a reception for Easley at an inn that has since been torn down.

Sewell, who also served on the board under former Gov. Jim Hunt, did not return messages left at his home or at work. He is a retired executive with the Golden Corral steakhouse chain. In 2005, Easley awarded him one of the state's highest honors, the Order of the Long Leaf Pine.

Campbell confirmed that he raised money for Easley in 2000 and 2004 by holding fundraisers at his lakefront cottage, but he did not have to disclose his efforts because he did not collect the checks. He cited the Easley memo.

Another appointee, Lanny T. Wilson of Wilmington, said in his 2000 disclosure form that he would follow up with information about his fundraising, but no such documentation is on file with the legislature or the Governor's Office. Wilson said he doesn't remember whether he provided it and said he didn't have to anyway because he did not "personally acquire" contributions.

In the disclosure he filed for his reappointment in 2005, Wilson listed totals he raised for 17 candidates, including Easley. He also wrote that he held a fundraiser for Easley. But other than family members, Wilson does not list the names of any contributors. The form asks for the names of contributors; the law says that appointees are required to disclose contributions.

Some report fully

Three other DOT board members members provided more information.

Cameron W. McRae of Kinston, who owns a string of Bojangles' restaurants, provided a spreadsheet that listed not only contributors, but also everyone he solicited. They contributed $126,000 for Easley in 2000.

G.R. Kindley, the former mayor of Rockingham and a builder, and Paul Waff Jr., an Edenton contractor and developer, also provided lists of contributors. They raised $38,000 and $24,000, respectively.

"I wanted everybody to know who was contributing," Kindley said in an interview. "I think it's important to know."

Waff, who left the board in 2002, said he was appointed after he went to R.V. Owens -- a renowned fundraiser for Easley, state Senate leader Marc Basnight and other Democrats -- to express an interest in a seat.

Easley's appointee for transportation secretary, Lyndo Tippett, a CPA from Fayetteville, was also required to fill out the disclosure form. Like Sewell and Campbell, Tippett wrote "none" where the form asked for the names of those he had collected campaign contributions from. He attached an explanation that said he delivered bundles of contribution checks to the campaign in Raleigh, but he did not collect them from individual contributors. He said in an interview that he did not look to see who wrote the checks or the amounts.

Tippett said his disclosure was a "textbook" example of complying with the law.

Tippett was a member of the Cumberland County steering committee for the campaign, which held two fundraising events. In an interview, Tippett said that he helped organize at least one fundraiser, which Easley attended. He said he had a file on the fundraiser, but he couldn't remember what it contained. He said he didn't know if the file was still available.

"I don't know if it's still there," he said. "The shredder came through town a few months ago and shredded all the files whether it was personal or business. I have no idea at the moment."

The transportation secretary also said it was not his concern what board members reported regarding their fundraising.

"They don't report that to me, so I don't have a problem with that," Tippett said. "Not my issue."

Easley named Sewell and McRae to two of the five newly created at-large seats on the board. Though the three other at-large members were required to have "expertise" in environmental issues, mass transit or government-related finance and accounting, the two seats Sewell and McRae took did not have to meet that requirement. Sewell had to have only "broad knowledge of and experience in transportation issues affecting rural areas." McRae had to be "familiar with the State ports and aviation issues."

The reform law requires Sewell, McRae and the other at-large members to represent the interests of the entire state. But records of an economic development discretionary fund that lawmakers created in 2005 shows that Sewell, McRae and another at-large member, Larry Helms of Union County, have so far directed their allotments -- a total of $5.5 million -- to their home transportation districts. Original article ...

October 31, 2007

Botched paving costly to DOT and NC taxpayers - $21 million

The botched paving job on Interstate in North Carolina cost taxpayers at least $21,000,000 dollars and many months of commuting hardships and misery for drivers.

At the tail end of a multi-year project to implement a major expansion of I-40 between Durham and Chapel Hill, NC, inspectors discovered that miles of new concrete pavement was breaking apart. More studies showed that the top layer of concrete had not been installed correctly and was breaking down even before the project was complete.

The project was already late and had cost taxpayers much more than originally planned and a major part of the work had to be torn up and reworked by contractors. The $21,000,000 repair is yet another demonstration of major mis-management and poor planning within North Carolina's Department of Transportation. The extension added another year of misery for weary commuters traveling the road each day.

Unfortunately for taxpayers, Governor Easley's hand picked director for the DOT, Lindo Tippett, has never admitted any responsibility for the blunder and has remained unscathed while lower level state employees were reprimanded and, in some cases, fired for the mistake. The Governor has not seen fit to replace Mr. Tippett and new reports emerge weekly of additional long postponement or cancellation of many needed major projects and continued severe budget shortfalls as taxpayers foot the bill for gross mismanagement and incompetence in the state's operations.

A new article has appeared in the October issue Asphalt Magazine by the manufacturer of heavy equipment that was used to tear up the broken new concrete and gives an interesting view of the magnitude of work required, done only at night, to undo the botched paving work. The contractor has now completed repairs made under a $21 million project. Interestingly enough the state threatened the contractor with significant fines of $10,000 per hour if workers had not moved out of the way of commuters by morning as the project was carried out.

Read more of this fascinating use of technology to repair one of North Carolina DOT's largest blunders to date....

Asphalt Contractor magazine
October 30th, 2007

Failed concrete overlay milled, replaced with HMA

A failing concrete overlay on I-40 near Raleigh-Durham, NC, was determined by the North Carolina DOT to be in need of replacement. The specifications for the project provided that the concrete overlay be removed by cold-milling and replaced with hot mix asphalt (HMA) each night.

The Lane Construction Corporation was awarded the $21-million project for the North Carolina DOT, and has undertaken the milling, while its Rea Contracting LLC affiliate performed the HMA placement on strict nightly schedules.

"We're grinding anywhere from 3 to 3.5 inches of concrete overlay off the Interstate using a Wirtgen W 2200 cold mill with full lane, 12-foot 6-inch drum," says J. Todd Moore, superintendent of the I-40 project for Lane. "We have approximately 21 lineal miles to do, two lanes eastbound, and two lanes westbound, as well as all off ramps and acceleration lanes."

The existing pavement is three lanes wide each way, with the third (inside) lane made of full-depth concrete, recently reconstructed. The concrete overlay being removed had been placed over existing Portland cement concrete and was experiencing spalling at the joints, and patched "blow-out" potholes where heavy traffic was pulling material from the pavement.

"We have about 290,000 square yards of concrete removal required for this project," says Richard Snow, P.E., construction manager for Lane. "Our average pace of 2,200 lineal feet per night of lane works out to about 2,700 square yards. On weekends we do a lot more with our marathon closures. While we still keep one lane open, we are able to keep the two lanes closed 56 hours straight."

"We're finding both conventional and high early-strength concrete in the overlay, but the W 2200 is chewing right through it all," Moore says. "We've used the W 2200 for scarifying concrete as well, but this 3.5-inch-deep cut is more of a test for the machine during the four hours we work each night."

New open-space tooth pattern

A new open-spaced tooth pattern drum design which applies more horsepower per tooth, but with fewer teeth, was being used on this cold mill.

"We're using Wirtgen teeth with 1.25-inch spacing of teeth on the drum, with some 130 teeth on the drum," Moore says. "We're not using up as many teeth on the drum as before, but it's grinding up the concrete more efficiently, and pulling the material off the existing concrete. It's coming up in a little bit larger chunks, and the milling is more efficient. It's leaving a nice pattern on the pavement, and both the state and the paving contractor are well-pleased."

Nonetheless, Moore and his crews have experimented with the right configuration for the drum and machine.

"At one time we slowed the cutter drum down, but had no success with increasing footage, because teeth were breaking off as the drum was going slower, and not keeping up," he says. "We brought it back to its original speed - about 21 feet per minute, and now things are rolling. Because we're limited at night to what can be repaved before rush hour, I'll open up anywhere from 2,000 to 2,600 feet, depending on how tight the concrete is in our four-hour period."

Thus a given night would see Lane begin milling after 8 p.m. and conclude about midnight, with Rea Contracting paving the next four to five hours, with the last hour striping and removal of the traffic control pattern. "We have to be off the Interstate by 6 a.m., with penalties of $10,000 per hour," Moore says.

Superpave replaces concrete

The concrete overlay was being replaced by two lifts of a Superpave mix, PG 76-24 polymer modified binder, with 9.5 D mm aggregate. The first was a 2-inch lift, followed by a 1.5-inch lift on top to bring to grade. The HMA was provided by Rea Contracting out of its Northern Raleigh plant. North Carolina DOT specified a material transfer vehicle be used between truck and paver.

At midnight, the milling and paving supervisors meet to run numbers as to how far the milling can go that night, so both crews can finish their jobs that morning.

"We see how far we will mill, so we can finish milling and Rea can finish paving, all at a happy medium," Moore says. "We also have to figure in cutter tooth changes, and that will slow us down a little. Right now we do a complete cutter tooth change every 1,000 to 1,100 feet; the more efficiently we can change the 130 milling teeth, and install new ones, the faster we can get back to work."

Lane's complete tooth change using Wirtgen quick-change toolholders will take about 15 minutes.

Hydro-sweeping and infrared drying

Following the W 2200, a standard street sweeper was cleaning the milled surface, followed by a contract hydrovacuum truck which was water-blasting any remaining material off the surface, and vacuuming it into a tank for disposal.

"We're picking up the heavy stuff with the sweeper, and then we have a 36,000 psi-capable hydrovac truck clean the pavement with sprayed water, and vacuum up the water and any fines," Moore says. "This surface has to be totally spotless before we apply our tack coat."

And because the surface has to be bone-dry before the tack coat - and not much time in which to dry - Lane was using an infrared heater truck with generator to dry the milled surface prior to tack and overlay. "The truck has two 195-mph blower fans which blow off any standing water, and heating coils which evaporate any remaining moisture."

Lane's W 2200 with full-lane width drum was giving Lane the power and reliability it needed to keep this project on schedule and in budget.

Moore was finding that the new Eco-Cutter drum from Wirtgen was keeping the job moving along with accrued savings from use of fewer teeth. "This is the first application for which we've used this full-lane drum," Moore says. "This application is nice for the full-lane drum because it's one lane, one way, without having to back up and go. And the drum has a coarser pattern to it. My feeling is, 'the coarser, the better', because the asphalt can hold tighter in the voids than it can in a smoother surface."

Fewer cutting tools on the new Eco-Drum means less resistance to cutting and a higher rate of advance, with lower tool costs per milled cubic yard. These drums, with smaller number of point attack tools, make sure work proceeds more quickly and cost-efficiently.

Despite the fact that the standard-width Eco-Cutter may equipped with only 114 cutting tools, its performance with 1-inch tool spacing is roughly 20 percent higher than that of a standard milling drum with 0.6-inch tool spacing when working in hard asphalt and at a milling depth of 8 inches.

About the Wirtgen W 2200

The W 2200 is designed for big, continuous cold milling projects in which a pavement must be removed mile after mile. The high-horsepower, deep-cutting, high-production

W 2200 lets users mill large projects in a short period of time.

The W 2200 has a standard cutting width of 87 inches, four large D-6 crawler tracks, a milling drum with a high-efficiency mechanical belt drive, and an efficient front-loading system. It has a mechanically driven milling drum and two-part slewing front-end discharge conveyor of variable height. The machine travels on crawler tracks. Robust welded construction with mounts for the individual function modules and superstructures. The tanks for diesel fuel and water are integrated into the chassis. The hydraulic fluid tank forms a separate unit.

Its maximum cutting depth is 14 inches and with the optional Flexible Cutter System, can cut up to 14 feet 1 inch wide. The W 2200 has an operating weight of 96,342 pounds with a 900-hp power plant.

The walk-through operator's platform with access ladder on each side is located in the middle part of the machine. It is equipped with two identical control consoles which can be pivoted and vertically adjusted. Both control consoles and the right-hand driver's seat can be displaced outwards beyond the edge of the machine. The steering and feed control operate with electrical proportional action and are controlled via joysticks.


The Wirtgen information and diagnosis system - called the WIDIS 32 - provides the driver with comprehensive up-to-the-minute information on the current status of the engine and hydraulic system and generates visual and acoustic alarms when necessary. The crawler tracks are suspended from the chassis via round cylinders, the height of which can be adjusted hydraulically. The height of each crawler track can be adjusted individually. The height required for the milling depth is adjusted via the two cylinders at the front, while the rear crawler tracks form a full floating axle. The large lift ensures considerable ground clearance simplifying such difficult maneuvers as reversing or loading and unloading the machine from a low-bed truck.

September 29, 2007

Report of NC DOT incompetence hidden from public

An alarming new report provides more evidence that NC's DOT organization is poorly suited to meet transportation needs of the state and reveals the organization is withholding a major consultant review of the DOT paid for by taxpayer dollars. The DOT continues to reflect the incompetence of director Lindo Tippett, appointed by Governor Easley, and the inability of DOT staff in managing thousands of state employees responsible for maintaining NC's road infrastructure and planning what is needed to handle the unprecedented growth in state traffic.

It is clear that the time has come to demand that the DOT director step down and a replacement be appointed that has the knowledge and ability to manage the organization and facilitate planning and funding of what is needed to build and maintain an adequate transportation infrastructure that will allow the state to be competitive.

Results from a comprehensive survey of some 13,000 thousand DOT workers and interviews with at least two dozen key legislators, state officials, business executives and local transportation officials, along with information from follow up discussions, strongly suggests a lack of understanding within the organization about the mission of the DOT and tells of poor use of funds and inadequate project plans and schedules. Mark L. Foster, the department's chief financial officer, confirmed that "DOT employees complained that they lack a shared understanding of their mission." He briefly described other criticisms: "Road projects cost too much time and money. It's hard to figure out who is responsible for any DOT project."

Read the report and learn more about the lack of a "unified vision", deception and confusion in the state's DOT organization...
News and Observer
September 29, 2007
Bruce Siceloff, Staff Writer

Consultants review of DOT under wraps
McKinsey & Co. was asked to prepare a sweeping evaluation of the transportation agency, but DOT and the company are keeping a tight rein on the information

State Department of Transportation officials are paying a consultant $2.5 million to help make the agency more responsive, accountable and transparent.

They are keeping much of the work secret.

Attorneys for DOT and McKinsey & Co., an international management consultant hired in April to evaluate DOT, blacked out several pages of contract details and stamped other pages "CONFIDENTIAL" before DOT released them to The News & Observer.

Other contract documents indicate that McKinsey initially was asked for a candid, sweeping assessment of DOT's "strategic direction and organizational structure." It was expected to file reports in May and June.

DOT has declined to release a word of its consultant's findings. The April 11 contract includes an unusual pledge that DOT will seek McKinsey's permission before making public references to McKinsey or releasing any "reports, analyses or other such materials" it receives from McKinsey.

DOT officials now say they did not request or receive any written reports from McKinsey, whose contract ends in mid-October. Read more...

July 18, 2007

NC DMV Commissioner Abruptly Resigns

Following allegations that the NC DMV commissioner helped a friend get legal title to a replica of a 1937 truck as an original vehicle, and a scandal following suspension of an employee for revealing the situation to the state and the public, the commissioner has suddenly resigned without a clear explanation.

Could this be an indication of a larger scandal in the making? This is the latest of a string of scandals in the NC DMV office...

News and Observer
July 19, 2007
Dan Kane, Staff Writer

Tatum steps down as DMV chief
The terse announcement of his departure follows a controversy over whether he helped a friend with a title matter

N.C. Division of Motor Vehicles Commissioner George Tatum resigned Wednesday, after documents and interviews with an agency staffer suggested that Tatum helped a friend get a replica of a 1937 Ford truck titled as the real thing.

Tatum could not be reached for comment, and a state Department of Transportation spokesman would say only that the resignation involved a personnel matter.

Gov. Mike Easley, who appointed Tatum commissioner in April 2003, said in a short statement that Tatum needed to resign.

"I believe it was appropriate," Easley said.

Mark Foster, the DOT's chief financial officer, will be interim DMV commissioner.

The DMV, which issues driver's licenses and vehicle registrations and conducts safety and emissions inspections, has been long known as an agency with numerous controversies and scandals. Tatum is not the first commissioner to resign following allegations that he misused his office. Alexander Killens quit in 1996 after an audit showed he used staff as drivers and personal security. He pleaded guilty to a misdemeanor obstruction of justice for impeding an investigation into whether a DMV employee misused a state car. Read more...


July 8, 2007

Favoritism in NC Politics

Another example of favoritism in NC political circles was reported in the July 8, 2007, News and Observer about the leader of NC's DMV organization helping a friend get a recently built "kit car" titled as an authentic antique car.

According to a DMV staff member, a friend of DMV Commissioner George Tatum was allowed to get a vehicle title issued that says the owner's kit built car is an old 1937 Ford truck when it is not after the commissioner became aware the car owner's first attempt at getting a title failed. Titling the vehicle in this way "reduced what the vehicle's owner must pay in taxes and could inflate the value of the vehicle on the open market".

This blatant abuse of registration requirements allows the owner to pay far less in taxes than with a properly registered vehicle. According to the report the vehicle owner "paid $15 in highway use taxes on the truck because the DMV values a 1937 Ford truck at $500". In reality this tax amounts to 3 percent of the book value for the vehicle and the state and taxpayers lose out on lost taxes. "Tax on a newly built custom car is based on the cost of labor and materials, which is typically in the $10,000 to $30,000 range" ($300 to $900 in taxes).

It seems recently like many of Governor Easley's team members are being tied back to political favoritism, helping friends and friends family members get jobs, denial of responsibility for failures and blunders in state organizations and other involvements unbecoming to the Governor and his circle of friends.

Read the report and you decide...
News and Observer
July 8, 2007
Dan Kane, Staff Writer

Staffer says DMV chief favored friend
Commissioner calls charge a lie; staffer briefly suspended

DMV Commissioner George Tatum oversees the documentation of millions of North Carolina motor vehicles, but he has come under fire for a document attached to just one -- a kit car that looks like a vintage 1937 Ford truck.

Although the car isn't a real '37 Ford, it has a title from the Division of Motor Vehicles that says it is. The title might have reduced what the vehicle's owner must pay in taxes and could inflate the value of the vehicle on the open market.

How the fake '37 Ford came to be titled as a real '37 Ford has provoked a charge that Tatum wanted DMV inspectors to approve the title as a favor for a family friend. Read more...

March 20, 2007

NC Issued 27,000 licenses on invalid social security numbers

More alarming news from the office of Les Merritt, our state auditor working on the state payroll and in his own personal business.

North Carolina has issued some 27,000 drivers licenses on invalid social security numbers. Why is this a big problem? This means that thousands of drivers licenses accepted for identification in all sorts of situations can't be traced back to known US citizens and could be used for virtually any purpose and could allow holders to gain access to places they should not be allowed into, cash checks or withdraw funds illegally, etc.

In a state audit report released March 20th it has been stated that "auditors don’t know if the invalid Social Security numbers were intentionally used to obtain licenses" according to Chris Mears, a spokesman for the auditor’s office. “We’re assuming that some of those simply will be keypunch errors [by DMV clerks], but we thought that 27,000 was a big number,” Mears said.

Yeah, right. This is a pretty large blunder to simply write off to possible data entry errors. This means we could have hundreds or thousands of unscrupulous people loose in the state that have accepted means of identification that could now gain access to many places where they can do harm or proceed to arrange further means to obtain funds or illegal accounts or whatever might serve their purposes without anyone knowing it.

Read the report out today..
News and Observer
March 20, 2007
Dane Kane

27,000 licenses on invalid Social Security numbers

A state audit released today has found that North Carolina has issued roughly 27,000 drivers licenses to motorists based on invalid Social Security numbers.

State Auditor Les Merritt said the problem lies with licenses issued under an older system that the state Division of Motor Vehicles now uses. The new system, which the division began using in August, checks Social Security numbers automatically before issuing licenses. The old system did not.

“The hole we discovered was that DMV did not review previously issued licenses," Merritt said in a news release. “That hole presents a potential threat to homeland security and exacerbates the problem of identity theft.” Read more...

December 16, 2006

Ultimate responsibility for DOT problems

It would seem that with all the major problems in road construction, planning, repair of repairs and mis-management of taxpayer dollar expenditures that the top person in North Carolina's Department of Transportation would bear the ultimate responsibility for bungled work. News articles are frequently seen about state funds falling short of what is needed for building new roads, repairing and repaving of existing roads and planning of major new roads needed to handle the rapid growth in many areas of the state. Could it be that there is a problem from the top down in running the DOT?

State Transportation Secretary Lyndo Tippett is at the top of the chain and is a political appointee in Governor Easley's organization. It's interesting that with all the problems that keep surfacing that the top man in the DOT has not admitted to being ultimately responsible for state road issues and has not been replaced. Could this be just another indicator that the "good old boy" system is alive and well in state politics and that nothing will change until a new Governor is elected?

A December, 2006, article discusses responsibilities and salaries of a number of people in the DOT organization and indicates that Secretary Tippett issues reprimands for poor performance. Nothing has been said about Tippett's salary and whether he should be held accountable for poor performance and management...
News and Observer
December 16, 2006
Bruce Siceloff and Toby Coleman, Staff Writers

3 rebuked for road failures
The transportation secretary issues written warnings, saying that the public's trust must be regained

State Transportation Secretary Lyndo Tippett said Friday that three department administrators were reprimanded for their involvement in the failed Interstate 40 widening project in Durham County that will require an estimated $18.6 million repair.

In a six-page report to the state Board of Transportation, Tippett identified 10 present and former Department of Transportation engineers and administrators who played key roles in planning, designing and building the 10.6-mile Durham County project, which was finished in 2004. Three of the 10 were singled out for the only disciplinary actions DOT has announced.

"The result of these errors has created a decrease in public confidence and trust in the Department," Tippett wrote in a memo. "Accountability for the errors is essential to re-establishing the public confidence and the integrity of the Department." Read more...